Filter
Top Products
5.4.7.2 Tag-based (IEEE 802.1Q) VLAN
This page, user can create Tag-based VLAN, and enable or disable GVRP protocol.
There are 256 VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on the
switch belong to default VLAN, VID is 1. The default VLAN can’t be delete.
GVRP (GARP [Generic Attribute Registration Protocol] VLAN Registration
Protocol)
GVRP allows automatic VLAN configuration between the switch and corresponding
nodes. If the switch is connected to a device with GVRP enabled, you can send a GVRP
request using the VID of a VLAN defined on the switch. The switch will automatically
add the device to the existing VLAN.
40