Filter
Top Products
N
uration7.2.6 Port Mirroring Config
d networks. Traffic through ports can
be monitored via one designated port. Traffic through ports can be monitored by one specific
ort. That is, traffic going in or out of monitored ports will be duplicated into the monitoring port.
Press Spacebar to change the configuration of each item.
1. Select <Edit>.
2. Sniffer Mode: Press Spacebar to set the Sniffer mode to: Disable \Rx \Tx \Both.
. Monitoring Port: This means that the sniffer port can be used to see traffic of all monitored
ports. Press Spacebar to select it.
4. Monitored Ports: The ports you want to monitor. All monitored port traffic will be copied
to the sniffer port. You can select up to 25 ports to monitor on the switch. You can choose
which port to monitor in only one sniffer mode. Press Spacebar to choose a member port,
“V” – is the member, “—“ – not the member.
5. Press Ctrl + A go back to the action menu.
. Select <Save> to save all configured values.
. On the action menu line you can press <Next Page> to configure ports 9-26, and <Previous
Page> to return to the last page.
OTE: You can only operate in one sniffer mode at any given time.
Port mirroring is a method of monitoring traffic in switche
p
3
6
7
85