Filter
Top Products
NOTE: Whenever you change the VLAN settings, you will need to restart the switch.
the VLAN mode is set to 802.1Q VLAN, you can set PVIDs, as well as ingress filtering 1 and
gress filtering 2 in this section.
. PVID (Port VID: 1-255): Type in the PVID.
. Non-Member Drop:
Same as Ingress Filtering Rule #1 on the web interface.
Only forwards packets with a VID that matches a corresponding port’s configured VID.
Press Spacebar to choose to “forward” or “drop” a frame whose VID does not match the
port’s configured VID.
. Untagged Drop:
Same as Ingress Filtering Rule #2 on the web interface.
Drops untagged frames.
Press Spacebar to choose to “forward” or “drop” the untagged frame.
If
in
1
2
3
70