Filter
Top Products
Publication 1761-UM006A-EN-P - February 2001
6-4 E-Mail Messages (Node 50 to 99)
Message Fields (to, from, subject)
The ENI includes the “to”, “from”, and “subject” fields in the body of
the message.
The default “from” text is ENI0.0.0.0@eni1761.org. This can be
changed in the ENI configuration, Node 249. See page 6-2 or Chapter
4.
The standard format of the “subject” line is:
Subject: 1761ENI.MSG(
plus the first 32 characters of text
)
For example, if the message text was “The quick brown fox jumped
over the lazy dog’s back”, the “subject” line would read:
Subject 1761ENI.MSG(The quick brown fox jumped over )
E-Mail
Message
E-Mail Address
Configuration
Description
Node 50 Node 150 The data within the message is sent to Node 50 and
forwarded to the e-mail address stored at Node 150.
Node 51 Node 151 The data within the message is sent to Node 51 and
forwarded to the e-mail address stored at Node 151.
Node 52 Node 152 The data within the message is sent to Node 52 and
forwarded to the e-mail address stored at Node 152.
↓↓ ↓
Node 98 Node 198 The data within the message is sent to Node 98 and
forwarded to the e-mail address stored at Node 198.
Node 99 Node 199 The data within the message is sent to Node 99 and
forwarded to the e-mail address stored at Node 199.
IMPORTANT
The ENI does not support non-printable ASCII
characters and may exhibit unpredictable behavior
when these characters are used in an e-mail
message. Avoid using non-printable ASCII characters
such as Carriage Return, Line Feed, Tabs, etc.