Filter
Top Products
Publication 1761-UM006A-EN-P - February 2001
8-4 Troubleshooting
15H Local channel configuration parameter error exists.
16H Target or Local Bridge address is higher than the maximum node address.
17H Local service is not supported.
18H Broadcast is not supported.
21H Bad MSG file parameter for building message.
30H PCCC Description: Remote station host is not there, disconnected, or shutdown.
37H Message timed out in local processor.
39H Local communication channel reconfigured while MSG active.
3AH STS in the reply from target is invalid.
40H PCCC Description: Host could not complete function due to hardware fault.
45H MSG reply cannot be processed. Either Insufficient data in MSG read reply or bad network address parameter.
50H Target node is out of memory.
60H Target node cannot respond because file is protected.
70H PCCC Description: Processor is in Program Mode.
80H PCCC Description: Compatibility mode file missing or communication zone problem.
90H PCCC Description: Remote station cannot buffer command.
B0H PCCC Description: Remote station problem due to download.
C0H PCCC Description: Cannot execute command due to active IPBs.
D0H One of the following:
No IP address configured for the network or ENI not configured for Node Address used.
Bad command - unsolicited message error.
Bad address - unsolicited message error.
No privilege - unsolicited message error.
D1H Maximum connections used - no connections available.
D2H Invalid internet address or host name.
D3H No such host / Cannot communicate with the name server.
D4H Connection not completed before user–specified timeout.
D5H Connection timed out by the network.
D7H Connection refused by destination host.
D8H Connection was broken.
D9H Reply not received before user–specified timeout.
DAH No network buffer space available.
E1H PCCC Description: Illegal Address Format, a field has an illegal value.
E2H PCCC Description: Illegal Address format, not enough fields specified.
E3H PCCC Description: Illegal Address format, too many fields specified.
E4H PCCC Description: Illegal Address, symbol not found.
E5H PCCC Description: Illegal Address Format, symbol is 0 or greater than the maximum number of characters support by this
device.
Error Code Description of Error Condition