Filter
Top Products
118 Operating in Automated Mode Chapter 4
Operating in Demo Mode
With the library in Demo Mode (demonstration mode), the hand takes a data
cartridge from a storage cell, moves the cartridge, and places the cartridge
back into a different storage cell.
Caution Audit update required: If DEMO MODE is interrupted, Get-Put
Loop operations will become disrupted, and cartridges may not
be returned to their original locations. When DEMO MODE
completes, you must IPL to re-audit the library, and your backup
software applications . You must then notify the customer to
update the host cartridge database.
To operate in Demo Mode:
1. Ensure the library and drives are not in use.
2. Press the [MENU] button until the Main Menu displays.
3. Press the arrow buttons until the cursor underscores DIAGNOSTICS.
4. Press the [SELECT] button.
The panel displays the Main Diagnostics menu.
5. Press the arrow buttons until the cursor underscores DEMO MODE.
6. Press the [SELECT] button.
The Demo Mode menu appears.
7. Use the arrow buttons to enter the desired number of loops. The up arrow
button increases the value by 100; the down arrow button decreases the
value by 100.
Note HP does not recommend looping tests excessively.