Filter
Top Products
Chapter 4 Operating in Automated Mode 97
Chapter 4
Library Status
The library status line indicates the current state of the library. Table 7 on
page 97 explains the messages that might appear on this line.
Web Status
Following the library status line is a message indicating that the Web-Based
Library Administrator (WBLA) is enabled. For more information on the WBLA,
see Web-Based Library Administrator (WBLA) on page 28.
Table 7
Library Status Messages
Message
MessageMessage
Message Explanation
ExplanationExplanation
Explanation
LIB MAIN DOOR OPEN The library’s front door is open. When
you close it, the library will reset
(initialize).
LIB INIT REQUIRED The library requires initialization. You
must press the [RESET] button.
LIBRARY NOT READY The library is not available to perform
operator-requested actions. Some status
information might be available through
the network interfaces.
LIBRARY READY The library has completed initialization
and is ready to perform requested
actions.
LIB MAINTENANCE MODE The library is offline because it is
performing diagnostic tests.
INTERVENTION REQUIRED The library is experiencing a problem.
You should note the FSC (if the library
has issued one) and call your service
representative.
LIB UNKNOWN STATE The library does not recognize its current
state. You should note the FSC (if the
library has issued one) and call your
service representative.