Filter
Top Products
Chapter 2 Tape Drive Power Switches 63
Chapter 2
Tape Drive Power Switches
The tape drives are behind the drive access door, inside the right side door of
the library. Each drive has a power switch that controls the power to only that
drive.
Note The library’s main power switch controls the AC power to the
library and the drive column.
■ To remove power from a drive, push the drive switch to the “O” position.
■ To supply power to a drive, push the drive switch to the “|” position
Figure 24 Drive Power Switch Locations
C65131
1
2
1 DLT or Ultrium drive power switch 2 9840 drive power switch