Filter
Top Products
HP OmniBook 2100/3000/3100 Product Information 1-7
Resetting the OmniBook
1. Use a pen or a straightened paper clip to push the system-off button in the hole on the back panel.
(The switch is on the motherboard.)
–or–
Press the blue power button until the display shuts down. (The switch is on the icon PCA.)
2. After the computer shuts down, press the blue power button to turn it on.
Note
The OmniBook can boot from a CD if all these conditions are true:
• You have an internal CD-ROM drive installed,
• You have a bootable CD in the drive, such as the OmniBook Recovery CD, and
• You select the CD-ROM drive as the boot device. You can do this during reboot by pressing
ESC to cancel the OmniBook screen, then ESC to display the boot-device menu for a one-
time selection.