HP (Hewlett-Packard) 2100 Laptop User Manual


 
HP OmniBook 2100/3000/3100 Troubleshooting and Diagnostics 3-23
Serial Port Sets how the serial port is configured by the BIOS (specified
or automatic).
Enabled
Base I/O address Sets the I/O address and interrupt. 3F8h, IRQ4
(COM1)
Infrared Port Sets how the infrared port is configured by the BIOS (specified
or automatic).
Disabled
Mode Sets the hardware to support SIR (Standard IR), ASK IR
(amplitude shift keyed IR), or FIR (Fast IR) infrared
communications. (Driver installation required.)
SIR
Base I/O address Sets the I/O address and interrupt. 2F8h, IRQ3
(COM2)
DMA channel For Fast IR mode, sets the DMA channel. DMA3
Parallel Port Sets how the parallel port is configured by the BIOS (specified
or automatic).
Enabled
Mode Sets the port to normal, bi-directional, EPP, or ECP. ECP
Base I/O address Sets the I/O address. 378h
Interrupt Sets the interrupt. IRQ7
DMA channel For ECP mode, sets the DMA channel. DMA3
Audio Sets how the audio system is configured by the BIOS
(specified or automatic).
Enabled
SB I/O address Sets the Sound Blaster I/O address. 220h
WSS I/O address Sets the Windows Sound System I/O address. 530h
AdLib I/O address Sets the AdLib synthesizer I/O address. 388h
Interrupt Sets the interrupt. IRQ5
1st DMA channel Sets the DMA channel for playback. DMA1
2nd DMA channel Sets the DMA channel for recording. DMA0
OmniBook 3000:
MPU Device
Sets how the MIDI capability is configured: by the BIOS
(specified settings or automatic) or by a PnP operating
system. The port replicator provides a MIDI port, but the
OmniBook does not.
Disabled
OmniBook 3000:
MPU I/O address
Sets the MIDI I/O address. 330h
OmniBook 3000:
Interrupt
Sets the interrupt. IRQ9
Security Menu Default
OmniBook 2100/3100:
User Password Is
Shows if a user password is set. Clear
OmniBook 2100/3100:
Administrator Password Is
Shows if an administrator password is set. Clear
OmniBook 2100/3100:
Set User Password
Press ENTER to set, change, or clear user password.
Password length can be no longer than 8 characters, 0-9, A-Z.
OmniBook 2100/3100:
Set Administrator
Password
Press ENTER to set, change, or clear administrator password.
This password protects BIOS Setup settings.
OmniBook 3000 only:
System Password is
Shows whether a password is set. Clear
OmniBook 3000 only:
Set System Password
Press ENTER to set, change, or clear the password.
Password length can be no longer than 8 characters, 0-9, A-Z.
Boot Sets whether a user password is required when the computer
boots.
OB 2100/3100:
Enabled
OB 3000:
Disabled