A SERVICE OF

logo

Open as PDF
next previous
Transparencies
Guidelines
● For great results, use HP Premium Inkjet Transparency Film.
● Do not exceed the In-tray capacity: up to 30
transparencies.
Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray, and then remove all paper from the In
tray.
3. Slide the paper-width guide all the way to the left, then pull
out the paper-length guide.
4. Place the transparencies in the In tray, with the side to
printed on facing down and the adhesive strip facing up and
toward the printer.
5. Carefully push the transparencies into the printer until they
stop so that none of the adhesive strips catch on one
another.
6. Slide the paper guides firmly against the paper.
7. Lower the Out tray.