Option for two-sided printing cannot be
selected
The printer driver cannot sense the duplexer until a print job
is sent to the printer. Print a single sided document, and then
print the two-sided document. The option for using the
duplexer will appear in the printer software.
If the option for the duplexer still does not appear, then
verify that the following conditions exist:
● The duplexer is attached to the printer.
● The duplexer is enabled in the printer software.
● The media type and size selected on the Paper/Quality tab
are supported by the duplexer.
For a list of supported media types and sizes, see the
specifications for your duplexer:
❍ Automatic Two-Sided Printing Accessory
❍ Auto Two-Sided Print Accessory with Small Paper Tray
Paper size changes when the two-sided
printing option is selected
The paper size is not supported by the duplexer.
Binding margin is in the wrong place
1. Open the Printer Properties dialog box.
