Filter
Top Products
Static Virtual LANs (VLANs)
Configuring VLANs
Fields that can be included in the customized display are shown in the table
below.
Field Display Example Default
id VLAN Id 5 6
name VLAN Name Vlan55 32
status Status Port-based 10
voice Voice enabled No 5
jumbo Jumbos enabled No 5
ipconfig How the ip address was configured Manual 10
Disabled
DHCP/BootP
ipaddr (IPv4) the IP address(es) 10.10.10.3 15 for IPv4
ipaddr (IPv6) fe80::212:79ff:fe8d:8000 46 for IPv6
ipmask The subnet mask(s) 255.255.255.6 15
/64 (prefix for IPv6 is in format “/XX”)
proxyarp Whether proxy arp is configured No 5
localproxyarp Whether local proxy arp is configured No 9
state “Up” if at least one port is up Up 5
The example in Figure 2-24 displays id at its default width, and will show up
to 20 characters of the VLAN name. The columns selected for display are
separated by spaces.
ProCurve(config)# show vlan custom A1-A3 id name:20 ipaddr state
Status and Counters - VLAN Information - Custom view
VLANID VLAN name IP Addr State
------ -------------------- --------------------------------- -----
1 DEFAULT_VLAN 15.255.134.74 Up
33 Vlan33 10.10.10.01 Up
44 Vlan44 15.255.164.13 Up
55 Vlan55 15.255.178.2 Down
15.255.178.3
15.255.178.4
60 Vlan60 fe80::212:79ff:fe8d:8000%vlan60 Up
Figure 2-24. Example of show vlan custom Command
If the width of the column requested is smaller than the header name of the
column, the display of the header name is truncated.
2-37