Filter
Top Products
edge switch 2/16 service manual 2–81
Diagnostics
a. At the Hardware View, click the port graphic. The Port Properties dialog box
displays.
b. Inspect the Operational State field.
Does the Operational State field indicate Segmented E_Port?
YES NO
↓
Analysis for a port failure or other link incident is not described in this MAP. Go
to "
MAP 0600: Port Failure and Link Incident Analysis
" on page 2-63.
6
Inspect the Reason field at the Port Properties dialog box. The following table lists port
segmentation reasons and associated steps that describe fault isolation procedures.
Segmentation Reason Action
Incompatible operating parameters. Go to step 11.
Duplicate domain IDs. Go to step 12.
Incompatible zoning configurations. Go to step 13.
Build fabric protocol error. Go to step 14.
No principal switch. Go to step 19.
No response from attached switch. Go to step 16.