Filter
Top Products
2–14 edge switch 2/16 service manual
Diagnostics
Go to step 2.
21
At the Port Properties dialog box, does the Operational State field display a
Segmented E_Port message?
NO YES
↓
E_Port segmentation is indicated. Go to step 23 to obtain event codes. If no
event codes are found, go to "
MAP 0700: Fabric, ISL, and Segmented Port
Problem Determination
" on page 2-79.
A message displays indicating a link incident or port problem. Go to step 23 to obtain
event codes. If no event codes are found, go to "
MAP 0600: Port Failure and Link
Incident Analysis
" on page 2-63.
22
A link incident may have occurred, but the LIN alerts option is not enabled for the port
and the attention indicator does not appear.
At the Hardware View, select Link Incident Log from the Logs menu on the navigation
control panel. The Link Incident Log displays.
If a link incident occurred, the affected port number is listed with one of the following
messages.
Link interface incident - implicit incident.