Filter
Top Products
edge switch 2/16 service manual A–23
Messages
Cannot start port
diagnostics.
Port diagnostics
cannot be started at
the product manager
application because
the Ethernet link is
down or busy.
Retry the operation later. If
the condition persists, contact
the next level of support.
Click OK to remove
all contents from log.
This action deletes all
contents from the
selected log.
Click OK to delete the log
contents or Cancel to cancel
the operation.
Connection to HAFM
server lost. Click OK
to exit application.
The HAFM
application at a
remote workstation
lost the network
connection to the
HAFM server.
Start the HAFM application to
connect to the HAFM server.
Could not export log
to file.
A log file I/O error
occurred and the file
could not be saved to
the specified
destination. The disk
may be full or write
protected.
If the disk is full, use another
disk. If the disk is write
protected, change the
write-protect properties or use
another disk.
Could not find
firmware file.
A firmware version
could not be found
because the data
directory structure for
the HAFM server is
corrupt.
Reinstall the HAFM and
product manager
applications. If the condition
persists, contact the next
level of support.
Could not remove
dump files from
server.
Dump files could not
be deleted from the
HAFM server
because the
notebook PC or
product manager
application is busy.
Retry the operation later. If
the condition persists, contact
the next level of support.
Message Description Action