Filter
Top Products
edge switch 2/16 service manual B–33
Event Codes
Event Code: 507
Message: Loopback diagnostics port failure.
Severity: Informational.
Explanatio
n:
A loopback diagnostic test detected a Fibre Channel port failure.
Action: No action required. An event code 506 is generated if this diagnostic failure results in a
hard port failure.
Event
Data:
Byte 0 = port number (00 through 63).
Byte 1 = engineering reason code.
Bytes 4 through 7 = elapsed millisecond tick count.
Bytes 8 through 11 = reason code specific.
Byte 12 = test type.
Distributio
n:
Switch HAFM Server Host
EWS
Event
Log
System
Error
LED
Event
Log
E-Mail Call-Hom
e
Sense
Info
Link
Incident
44