Filter
Top Products
edge switch 2/16 service manual A–33
Messages
The data collection
process has been
aborted.
The user aborted the
data collection
procedure.
Verify the data collection
procedure is to be aborted,
then click OK to continue.
The director did not
accept the request.
The switch or director
cannot perform the
requested action.
Retry the operation. If the
condition persists, contact the
next level of support.
The director did not
respond in the time
allowed.
While waiting to
perform a requested
action, the switch or
director timed out.
Retry the operation. If the
condition persists, contact the
next level of support.
The director is busy
saving maintenance
information.
The switch or director
cannot perform the
requested action
because it is busy
saving maintenance
information.
Retry the operation later. If
the condition persists, contact
the next level of support.
The director must be
offline to configure.
This configuration
task requires the
switch or director to
be offline.
Take the switch or director
offline and retry the action.
The Ethernet link
dropped.
The Ethernet
connection between
the HAFM server and
the switch or director
is down or
unavailable.
Establish and verify the
network connection.
The firmware file is
corrupted.
A firmware version
file is corrupt.
Contact the next level of
support to report the problem.
The firmware version
already exists.
This firmware version
already exists in
HAFM server’s
firmware library.
Informational message
only-no action is required.
Message Description Action