Filter
Top Products
Chapter 2 Printing Tasks 116
Using the Stapler
Selecting the Stapler from the Control Panel
If your software does not support stapling, set it using the directions below.
1 Press M
ENU
repeatedly until PAPER HANDLING MENU appears.
2 Press I
TEM
repeatedly until PAPER DEST= STANDARD OUTBIN * appears.
3 Press + repeatedly until PAPER DEST= OPTIONAL BIN 6 appears. (See
pages 109
and 110 to choose the appropriate bin according to the mode
you are using.) Your network administrator may have changed the name of
this bin. For example, it may be called STAPLER.
4 Press S
ELECT
to save your choice. An asterisk (*) appears next to your
selection.