Filter
Top Products
Appendix C Printer Memory and Expansion 472
Installing Memory
3 Grasp the screws and pull the formatter
board out of the printer. Place it on a flat,
non-conductive surface.
4 Remove the DIMM from the antistatic
package. Hold the DIMM with fingers
against the side edges and thumbs against
the back edge. Align the notches on the
DIMM with the DIMM slot. (Check that the
locks on each side of the DIMM slot are
open, or outward.)
See Maximum Memory Configuration
on
page 474
for the maximum amount of
memory for each DIMM slot.
5 Press the DIMM straight into the slot (press
firmly). Snap the locks on each side of the
DIMM inward to secure the DIMM into the
connector. (To remove a DIMM, the locks
must be released.)
Continued on next page.
3
4
5
FLASH
J10
J6
J7