Filter
Top Products
Chapter 5 Problem Solving 289
Correcting Output Quality Problems
Paper is not going to the
correct output bin.
! Verify that the correct output bin is selected in the printer
driver. For more information on changing printer driver
settings, see the online help.
! The paper does not meet the specifications for the output
bin. See page 392
for more information on paper
specifications.
! If you are trying to send print jobs to an optional multibin
mailbox, verify that the multibin mailbox has been installed
on the printer and in the printer driver. Also verify the
multibin mailbox mode, which will affect the print job
destination.
The multibin mailbox will
not power on.
! Verify that the power cord is firmly plugged into both the
multibin mailbox and the power receptacle. Remove and
reconnect the power cord.
! Make sure that the cable from the multibin mailbox is
plugged into the printer C-link connector. If not, turn the
printer off, plug the cable into the C-link connector, then
turn the printer back on. See page 292
for cabling
configurations.
! Verify that the cables are firmly attached to the printer.
Problems with the Optional 8-bin Mailbox (continued)
Situation Solution