Filter
Top Products
Chapter 5 Problem Solving 277
Correcting Output Quality Problems
Job went to a different
bin than was expected.
The wrong size or type of paper was used for the job. (See
page 392
for supported paper sizes.)
Job prints on the wrong
side of the paper.
! Make sure you have loaded the paper correctly. (Starting
on page 89
.)
! If you are printing one-sided copies, load paper into Tray 1
with the side to be printed facing up. Load paper into
Trays 2, 3, and the 2000-sheet Input Tray with the side to
be printed facing down.
! If you are printing two-sided copies, load paper into Tray 1
with the first side to be printed facing down. Load paper
into Trays 2, 3, and the 2000-sheet Input Tray with the first
side to be printed facing up.
Printer Ignores Font, Format, or Tray/Bin Selection (continued)
Situation Solution