Filter
Top Products
Tips for working with cartridges
Use the following tips to work with cartridges:
●
To protect the cartridges from drying out, always turn the printer off using the On button, and
wait until the On button light goes out.
●
Do not open or untape cartridges until you are ready to install them. Leaving tape on the
cartridges reduces ink evaporation.
●
Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color
and icon for each slot. Make sure the cartridges snap into place.
●
Align the printer for best print quality. See
Improve print quality on page 92 for more
information.
●
When the Estimated Ink Levels screen shows one or both cartridges in a low state, consider
getting replacement cartridges to avoid possible printing delays. You do not need to replace the
cartridges until print quality becomes unacceptable. See
Replace the cartridges on page 69 for
more information.
●
If you remove a cartridge from the printer for any reason, try to replace it again as soon as
possible. Outside of the printer, if unprotected, cartridges begin to dry out.
ENWW Tips for working with cartridges 73