Filter
Top Products
Validate EFI Boot Options list: Timeout = 0 secs.
-------------------------------------------------------------------
1 OpenVMS on DKB400: PKA0.1
DKB400 PCI(0|20|1|0) Scsi(Pun1,Lun0)
efi$bcfg: Option Failed. Fixing Boot Entry automatically.
efi$bcfg: Entry 1 Boot0001 removed.
efi$bcfg: DKB400 PCI(0|20|1|0) Scsi(Pun1,Lun0) (Boot0001) Option
successfully added
-----------------------------------------------------------------------
1 entries validated.
— If no existing entry is found, a boot option is created and the procedure displays
the validation text, as in the following example:
efi$bcfg: DKB400: (Boot0003) Option successfully added
The Boot Option is called OpenVMS on DKB400:;
it is the first entry in the Boot Options menu, and is
configured (by default) to boot from SYS0.
VMS_FLAGS are set to -fl 0,30000
23. Installation Completes and Returns to OpenVMS Menu: The installation procedure is
now complete. The procedure displays information about the special startup procedure that
runs when the newly installed system is first booted. It then prompts you to press Return
(Enter) to continue. After you do so, you are returned to the OpenVMS operating system
menu. The following is a sample display:
The installation is now complete.
When the newly installed system is first booted, a special
startup procedure will be run. This procedure will:
o Configure the system for standalone or OpenVMS Cluster operation.
o Run AUTOGEN to set system parameters.
o Reboot the system with the newly set parameters.
You may shut down now or continue with other operations.
Process I64VMS_INSTALL logged out at 25-SEP-2009 14:45:49.54
Press Return to continue...
****************************************************************
You can install or upgrade the OpenVMS I64 operating system
or you can install or upgrade layered products that are included
on the OpenVMS I64 distribution media (CD/DVD).
You can also execute DCL commands and procedures to perform
"standalone" tasks, such as backing up the system disk.
Please choose one of the following:
1) Upgrade, install or reconfigure OpenVMS I64 Version 8.4
2) Display layered products that this procedure can install
3) Install or upgrade layered products
4) Show installed products
5) Reconfigure installed products
6) Remove installed products
7) Find, Install or Undo patches; Show or Delete recovery data
8) Execute DCL commands and procedures
9) Shut down this system
Enter CHOICE or ? for help: (1/2/3/4/5/6/7/8/9/?)
3.4 Installing the OpenVMS Operating System on to a System Disk 75