Filter
Top Products
Document feeder pick arm assembly
Before proceeding, remove the following components:
●
Document feeder tray. See
Document feeder input tray on page 77.
●
Document feeder cover. See
Document feeder cover on page 78.
Remove the document feeder pick arm assembly
1. Release two tabs (callout 1) on each end of the inner cover (for a total of four tabs), and then lift
the inner cover out of the outer cover.
Figure 1-124 Remove the document feeder pick arm assembly (1 of 4)
1
2. Remove the pick extension shaft (callout 1).
Figure 1-125 Remove the document feeder pick arm assembly (2 of 4)
1
80 Chapter 1 Removal and replacement ENWW