Filter
Top Products
Set the redial-on-no-answer option
If this option is on, the product redials automatically if the receiving machine does not answer. The
factory-set default for the redial-on-no-answer option is Off.
1.
From the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Fax Setup menu.
4. Touch the Redial Setup button.
5. Scroll to and touch the No Answer Redial button, and then touch the On button.
Set the redial-on-communication-error option
If this option is on, the product redials automatically if some sort of communication error occurs. The
factory-set default for the redial-on-communication-error option is On.
NOTE: The redial on communication error functionality is only available with Scan and Fax, Send
Fax Later, or Broadcast Fax methods.
1.
From the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Fax Setup menu.
4. Touch the Redial Setup button
5. Scroll to and touch the Communication Error Redial button, and then touch the On button.
Set light/dark and resolution
Set the light/dark setting
This setting affects the lightness and darkness of an outgoing fax as it is being sent.
The default light/dark setting is normally applied to items that are being faxed. The slider is set to the
middle as the default setting.
1.
From the Home screen, touch the Fax
button.
2. Touch the Settings menu.
3. Touch the Lighter/Darker button, and then touch one of the arrows to adjust the slider.
Set resolution
NOTE: Increasing the resolution increases the fax size. Larger faxes increase the send time and
could exceed the available memory in the product.
Use this procedure to change the default resolution for all fax jobs to one of the following settings:
●
Standard: This setting provides the lowest quality and the fastest transmission.
●
Fine: This setting provides a higher resolution quality than Standard, which is usually appropriate
for text documents.
134 Chapter 12 Fax ENWW