Filter
Top Products
c. Open the Fax Log menu.
d. Select the Print Log Now option.
●
If an extention phone is connected between the product and the wall, make sure that the phone
is hung up.
●
Connect the product directly into the wall telephone jack and resend the fax.
The control panel displays the message "Storing page 1" and does not progress
beyond that message
●
Delete stored faxes from memory.
a.
From the Home screen, touch the Setup
button.
b. Open the Fax Setup menu.
c. Open the Fax Tools menu.
d. Select the Clear Fax Log item.
Faxes can be received, but not sent
Send fax and nothing happens.
1. Check for a dial tone on the phone line by using the Start Fax button.
2. Turn the product off then on.
3. Use the control panel
to configure the fax time, date, and fax
hea
der information.
a.
From the Home screen, touch the Setup
button.
b. Open the Fax Setup menu.
c. Open the Basic Setup menu.
d. Open the Fax Header menu.
e. Enter the correct settings.
4. Verify that any extension phones on the line are hung up.
5. If the phone line also provides DSL service, make sure that the phone line connection to the
product includes a high-pass filter.
Unable to use fax functions from the control panel
●
The product might be password protected. Use the HP Embedded Web Server, HP Toolbox
software, or the control panel to set a password.
●
If you do not know the password for the product, contact your system administrator.
●
Verify with the system administrator that the fax functionality has not been disabled.
162 Chapter 12 Fax ENWW