Filter
Top Products
Schedule On/Off
1.
From the Home screen, touch the Setup
button.
2. Open the following menus:
● Device Setup
●
Power Handling
●
Schedule On/Off
3. Enable Schedule On or Schedule Off and set the times for those events to take affect.
Clean the product
Clean the printhead
During the printing process, paper, ink, and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems such as ink specks or smearing. This product has
a cleaning mode that can correct and prevent these types of problems.
Clean the printhead from the product control panel
1.
From the Home screen, touch the Setup
button.
2. Touch the Tools menu.
3. Touch the Clean Printhead button.
4. Load plain letter or A4 paper when you are prompted.
5. Touch the OK button to begin the cleaning process.
A page feeds through the product slowly. Discard the page when the process is completed.
Clean the scanner glass strip and platen
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can
affect performance. Use the following procedure to clean the scanner glass and white plastic backing.
1. Use the power switch to turn off the product, and then unplug the power cord from the electrical
socket.
2. Open the scanner lid.
ENWW
Clean the product
181