Filter
Top Products
●
SNMP disable/enable: SNMP (Simple Network Management Protocol) is used by network
management applications for product management. This product supports the SNMPv1 protocol
on IP networks. This product allows the ability to enable/disable SNMPv1.
●
WINS disable/enable: If you have a Dynamic Host Configuration Protocol (DHCP) service on
your network, the product automatically obtains its IP address from that server and registers its
name with any RFC 1001 and 1002-compliant dynamic name services as long as the Windows
Internet Name Service (WINS) server IP address has been specified. The WINS server IP
address configuration can be enable or disabled. If enabled, then the primary and secondary
WINS server can be specified.
●
SLP disable/enable: Service Location Protocol (SLP) is an Internet standard network protocol
that provides a framework to allow network applications to discover the existence, location and
configuration of networked services in enterprise networks. This protocol can be enabled or
disabled.
●
LPD disable/enable: Line Printer Daemon (LPD) refers to the protocol and programs associated
with line-printer spooling services that may be installed on various TCP/IP systems. LPD can be
enabled or disabled.
●
LLMNR disable/enable: Link-Local Multicast Name Resolution (LLMNR) is a protocol based on
the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform
name resolution for hosts on the same local link. LLMNR can be enabled or disabled.
●
Port 9100 disable/enable: The product supports raw IP printing through TCP Port 9100. This
HP-propriety TCP/IP port on the product is the default port for printing and it is accessed by HP
software. Port 9100 can be enabled or disabled.
●
Web Services disable/enable: The product supports the ability to enable or disable Microsoft
Web Services Dynamic Discovery (WS Discovery) protocols or Microsoft Web Services for
Devices (WSD) Print services supported on the product. These web services can be enabled or
disabled together or WS Discovery can be enabled separately.
●
Internet Printing Protocol (IPP) disable/enable: Internet Printing Protocol (IPP) is an Internet-
standard protocol that allows you to print documents and manage jobs over the internet. IPP can
be disabled or enabled.
Administrator Settings
The HP Embedded Web Server allows the ability to enable and disable certain product capabilities.
These include network, Ethernet, wireless, wireless access point (i.e. disables wireless direct
capability), USB, fax, fax reprint, copy, digital send, webscan, control panel lock, color fax, color copy,
color print from memory devices, all web services, only ePrint, and only Apps. The product must be
turned off, and then turned on again, for settings to take effect.
Color Access Control
HP’s suite of color access control tools allows you to enable or disable color by individuals users or
groups and applications. For more information see
www.hp.com/go/upd. The HP Embedded Web
Server also allows you to disable color faxing, color copying, and color print from memory devices.
178 Chapter 13 Manage and maintain ENWW