HP (Hewlett-Packard) CN461AB1H All in One Printer User Manual


 
1. Load the document into the document feeder.
2.
From the Home screen, touch the Fax
button.
3. Touch the Fax Methods button.
4. Touch the Send Fax Later button.
5. Use the keypad to enter the time of day to
send the fax. Touch the OK button.
6. Use the keypad to enter the date to send the
fax. Touch the OK button.
7. Use the keypad to type the fax number or
select one from the phone book/speed-dial
list. Touch the OK button. The product scans
the document and saves the file in memory
until the designated time.
Send a fax using monitor dialing
Monitor dialing allows you to dial a number from the printer control panel as you would dial a regular
telephone. When you send a fax using monitor dialing, you can hear the dial tones, telephone
prompts, or other sounds through the speakers on the printer. This enables you to respond to
prompts while dialing, as well as control the pace of your dialing.
TIP: If you are using a calling card and do not enter your PIN fast enough, the printer might start
sending fax tones too soon and cause your PIN not to be recognized by the calling card service. If
this is the case, you can create a speed dial entry to store the PIN for your calling card.
NOTE: Make sure the volume is turned on to hear a dial tone.
To send a fax using monitor dialing from the printer control panel
1. Load your originals.
2. Touch Fax, and then touch Start Black or Start Color.
If the printer detects an original loaded in the automatic document feeder, you hear a dial tone.
ENWW
Use fax
147