Filter
Top Products
3. Touch the Fax Setup button.
4. Touch the Advanced Setup button.
5. Touch the Fax Error Report button, and then
touch the printing option that you want to use.
Change error correction and fax speed
Set the fax-error-correction mode
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If
the product detects an error during the transmission and the error-correction setting is On, the
product can request that the portion of the fax be resent. The factory-set default for error correction is
On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you
are willing to accept the errors in the transmission. Turning off the setting might be useful when you
are trying to send a fax overseas or receive one from overseas, or if you are using a satellite
telephone connection.
1.
From the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Fax Setup menu.
4. Touch the Error Correction Mode button, and then touch the On button.
Change the fax speed
The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide
standard for full-duplex modems that send and receive data across telephone lines at up to 33,600
bits per second (bps). The factory-set default for the fax-speed setting is Fast (33600 bps).
You should change the setting only if you are having trouble sending a fax to or receiving a fax from a
particular device. Decreasing the fax speed might be useful when you are trying to send a fax
overseas, or receive one from overseas, or if you are using a satellite telephone connection.
1.
From the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Fax Setup menu.
4. Scroll to and touch the Fax Speed button, and then touch the speed setting that you want to use.
Solve problems sending faxes
●
An error message displays on the control panel
●
The control panel displays a Ready message with no attempt to send the fax
●
The control panel displays the message "Storing page 1" and does not progress beyond that
message
158 Chapter 12 Fax ENWW