HP (Hewlett-Packard) CN461AB1H All in One Printer User Manual


 
Network Setup menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
NOTE: Wireless menu options are only available on products that support wireless connectivity. For
more information, refer to the Product Basics chapter of this user guide.
Menu item Sub-menu item Sub-menu item Description
Wireless Menu
(wireless products only)
NOTE: You can also
access this menu by
touching the Wireless
button on the control
panel.
On
Off
Enables or disables the wireless network feature.
Wireless Direct
(wireless products only)
On
On With Security
Off
Configure the Wireless Direct settings for the product.
Wireless Setup Wizard
(wireless products only)
Print Guide
Continue
Guides you through the steps to set up the product on a
wireless network.
Wi-Fi Protected Setup
(wireless products only)
Continue Push Button
PIN
If your wireless router supports WPS, use this method to
set up the product on a wireless network. This is the
simplest method.
View Network
Summary
View Wired
View Wireless
Prints a summary of your network settings.
Print Wireless Test
Report (wireless
products only)
Prints a wireless test report.
Print Network
Configuration Page
Prints a report of your network configuration settings.
Advanced Setup Link Speed Automatic*
10T Full
10T Half
100TX Full
100TX Half
Sets the link speed. After setting the link speed, the
product automatically restarts.
IP Settings Automatic (DHCP)*
Manual (Static)
Set whether the product's IP setting are configured
automatically with DHCP or set manually.
IPv6 On*
Off
Enable or disable the IPv6 protocol on the product.
Hostname OK
Change
Use this setting the change how the product is identified
on the network.
ENWW
Setup Menu
21