Filter
Top Products
Control panel message Description Recommended action
ORDER SUPPLIES
alternates with
Ready
For help press
The supplies gauge will display the
consumption levels of print
cartridges.
More than one supply item is low.
Printing will continue until a supply
needs to be replaced.
1. Press M
ENU
to access the MENUS.
2. Press
or to highlight
INFORMATION, and then press
.
3. Press
or to highlight
SUPPLIES STATUS, and then
press
.
4. Press
or to highlight a supply
that needs to be ordered.
5.
Press
to access help for the
supply.
6. Obtain a part number from help.
7. Order the supply.
8. Repeat the previous steps as
necessary for each supply that
needs to be ordered.
9. Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded
Web server for more information.
ORDER TRANSFER KIT
LESS THAN X PAGES
For help press
alternates with
Ready
The transfer unit is near end of life.
Printing can continue until transfer unit
life ends.
1.
Press
to view help for the
message.
2. Obtain the transfer kit part number
from help.
3. Order the transfer kit.
Note
Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded Web
server for more information.
Output Bin Full
Remove all paper
from bin
The output bin is full and must be
emptied for printing to continue.
Remove media from the output bin.
Paused
To return to Ready
press the STOP key
The printer is paused, and there are no
error messages pending at the display.
The I/O continues receiving data until
memory is full.
Press the S
TOP
key.
Performing
upgrade
A firmware upgrade is in process. Do not turn the printer off until the printer
returns to Ready.
Performing...
PAPER PATH TEST
The printer is performing a Paper Path
Test.
No action necessary.
Performing...
PRINT/STOP TEST
The printer is performing a Print/Stop
Test.
No action necessary.
Control panel messages (continued)
170 Chapter 8 Problemsolving ENWW