Filter
Top Products
7. Select the printer, click Auto Setup, and then click Create.
8. On the Printing menu, click Set Default Printer.
Note
The icon on the desktop will appear to be generic. All the print panels will appear in the print
dialog in an application.
To install printer drivers from Mac OS 10.1 and later
1. Connect the network cable between the HP Jetdirect print server and a network port.
2. Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If
the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the
desktop, and then double-click the Installer icon. This icon is located in the Installer/
<language> folder of the Starter CD-ROM (where <language> is your language
preference). (For example, the Installer/English folder contains the Installer icon for the
English printer software.)
3. Double-click the HP LaserJet Installers folder.
4. Follow the instructions on the computer screen.
5. Double-click the Installer icon for the desired language.
6. On your computer hard drive, double-click Applications, Utilities, and then Print Center.
7. Click Add Printer.
8. Select the AppleTalk connection type on OS X 10.1 and the Rendezvous connection
type on OS X 10.2.
9. Select the printer name.
10. Click Add Printer.
11. Close the Print Center by clicking the close button in the upper-left corner.
Note
Macintosh computers cannot be connected directly to the printer using a parallel port.
Installing Macintosh printing system software for direct connections
(USB)
Note
Macintosh computers do not support parallel port connections.
This section explains how to install the printing system software for Mac OS 8.6, Mac OS
9. x, and Mac OS X and later.
The Apple LaserWriter driver must be installed to use the PPD files. Use the Apple
LaserWriter 8 driver that came with your Macintosh computer.
To install the printing system software
1. Connect a USB cable between the USB port on the printer and the USB port on the
computer. Use a standard 2-meter USB cable.
2. Close all software programs that are open or running.
3. Insert the printer CD-ROM into the CD-ROM drive and run the installer.
The CD-ROM menu runs automatically. If the CD-ROM menu does not run
automatically, double-click the CD-ROM icon on the desktop, and then double-click the
Installer icon. This icon is located in the Installer/<language> folder of the Starter CD-
ROM (where <language> is your language preference).
ENWW Printer software 21