Filter
Top Products
1. Open the tray.
2. Remove any paper that is in the tray.
3. Move the side guides all the way out.
4. Load paper in the tray with the side to be printed on facing down, and the top of the
paper on the left. Make sure that the stack height of the paper does not exceed the
maximum stack height mark in the tray.
Note
If you are duplexing, see Two-sided (duplex) printing for load instructions.
5. Move the side guides to the correct position so that they will lightly touch the paper stack
but will not bend the paper.
6. Look at the display within a few seconds of loading the paper (reinsert the paper if the
time has already elapsed). If the printer does not display the Tray X <TYPE> <SIZE>
message, the tray is ready for use.
ENWW Configuring input trays 81