Filter
Top Products
3. Load media face-up, making sure that the stack height of the paper does not exceed the
maximum stack height mark in the tray.
4. Slide the paper width and length guides in, making sure that they gently touch the paper.
5. Note the orientation of the paper and which dimension is the X dimension and which is
the Y dimension. X and Y dimensions are marked in the tray, for your convenience.
X
Y
1 CUSTOM/STANDARD switch
2 Page width (X dimension)
3 Page length (Y dimension)
6. Verify that the tray switch is set to CUSTOM.
7. Close the tray.
8. The printer displays the tray configuration. Look at the display.
92 Chapter 4 Printing tasks ENWW