Filter
Top Products
Operation and Usage3Ć28
To clear (erase) a speed dial number, clear (erase) a number from the current speed dial directory by pressing the
buttons in the sequence shown (in the FAX-950 the scroll down button is labeled Stamp). To reprogram an erased
speed dial number, refer to the speed dial programming procedure given earlier in this chapter.
Menu
27
Set
Stop
Photo
Scroll up
Scroll down
Scroll to access the
first number to be
cleared
Clear
Set
To clear additional numbers now,
scroll to next number to be cleared
and repeat to here until you have
cleared all desired numbers
2
→→→→
→
→→
→
→
→
→
To change a speed dial number, press the buttons in the sequence shown (in the FAX-950 the scroll down button is
labeled Stamp).
Menu
→ 27 →
→
Set
→
→→
Stop
Photo
Scroll up
Scroll down
Scroll to access the
first number to be
cleared
Clear
Set
→
→
To change additional numbers
or stations now, return to the
scrolling step in this procedure
and repeat to here for each num-
ber or station to be changed
→
To clear
Either clear the entry
or position the cur-
sor to reenter in-
formation
Contrast
Resolution
To position
cursor over
digits to be
replaced
→
Enter new
number
or station
name
→
→
2
→
Direct Dialing on the HP FAX-700 and FAX-750
To use direct dialing, press the buttons in the sequence shown and enter the necessary information where requested.
Dial the Phone Number
→
Load Document
(face down)
Start/Copy
→