Filter
Top Products
Operation and Usage 3Ć31
This feature is useful to send a priority fax when you already have other documents stored for transmission. The prior-
ity fax will be sent immediately after the current communication is completed.
When this feature is used, the message, Direct XMT Reserved, will appear in the display until the document is sent.
This feature can not be used for multifile, deferred, or broadcast transmissions.
To use direct transmission reservation, press the buttons in the sequence shown and enter the necessary information
where requested.
Load Document
→
→
→
Enter phone
number
Press the desired one-touch key
(01 – 24)
Enter 2–digit speed-dial code
Speed Dial
→
Start
→
To send, press
Memory
→
Enter a phone
number using
any of these
dialing methods
→
Set
(OFF)
Stopping a Transmission on the HP FAX-700 and FAX-750
You can stop an outgoing transmission anytime during dialing or after the transmission has begun. If the stop occurs
during a transmission, the already processed portion of your document may be sent to the receiving station. In the
midst of entering a phone number, simply pressing the Stop button will return the fax machine to standby mode.
To stop a transmission, either press the Stop button twice or press the buttons in the sequence shown.
Remove Document
from ADF
Stop
→
→
Enter
→
Stopping a Transmission on the HP FAX-900 and FAX-950
You can stop an outgoing transmission anytime during dialing or after the transmission has begun. If the stop occurs
during a transmission, the already processed portion of your document may be sent to the receiving station.
To initiate a transmission stop, press the buttons in the sequence shown:
→
Stop
1
You may now either remove the document or retry the transmission.