Filter
Top Products
Control Panel Messages
Chapter 6: Troubleshooting ❖ 6-21
Remove Jam Envel
An Envelope Feeder jam has occurred. The message alternates with the messages:
EnvelFeeder Jam-
Remove All Envel
and:
Remove EnvFeeder
Open Front Cover
ACTION: See “Envelope Feeder Jam” (page 6-29).
Remove Output
from Offset Tray
The Offset Catch Tray (OCT) is full. Printing cannot continue to the OCT.
ACTION: Remove the output from the OCT.
Remove Output
from Mailbox N
Mailbox bin N is full. Printing cannot continue to bin N.
ACTION: Remove the output from bin N. Press the unlock bin button, then
enter the password, if requested.
Remove Output
from Std. Tray
The standard output tray is full. Printing cannot continue.
ACTION: Remove the output from the standard output tray.
Remove PrintCart
Clear Paper Path
A paper jam has occurred. The message alternates with the message:
Paper Jam-
Open Front Cover
ACTION: See “Print Cartridge Jam” (page 6-31).
Replace
Fuser Cartridge
The Fuser Cartridge has reached End of Life.
ACTION: Order a new Fuser Cartridge (see Appendix A: Ordering Printer
Options) and replace as per the instructions in Appendix B: Replacing
Consumables.
Replace
Print Cartridge
The EP cartridge, which contains toner and drum, has expired. Printing cannot
resume.
ACTION: Insert new EP cartridge.
*Res. Change*
The printer is printing the job at a lower resolution than requested because there is
not enough memory available.
ACTION: Add printer memory.
*Res& Smplx Chg*
The printer has changed the job resolution, and changed a duplex job to simplex,
because there is not enough memory to process the job at the higher resolution
and duplex.
Table 6.2 Control Panel messages (continued)
Message
Description/Corrective Action
Table 6.2 Page 16 of 19
kug-ch06 Page 21 Thursday, March 6, 1997 4:48 PM