Filter
Top Products
Hard Drive
Appendix C: Installing and Removing Printer Options ❖ C-19
Removing the
Hard Drive
1
Power OFF the printer and disconnect the power cord and any interface cables.
2
Loosen the thumb screws and pull out the
controller board.
3
Place the controller board on a ream of
paper.
4
Gently unlatch the hard drive from the
standoffs and release the hard drive
connector from the controller board
connector.
5
Gently release the opposite end of the
hard drive from the standoffs, then lift the
hard drive from the controller board.
If possible, store the hard drive in its
original anti-static bag.
kug-appc Page 19 Thursday, March 6, 1997 4:51 PM