Filter
Top Products
Paper Handling
2-26 ❖ LN17 and LN17ps Printers User Guide
Using the
Offset Catch
Tray (OCT)
The Offset Catch Tray (Figure 2.6)—hereafter referred to as
OCT—is an optional output device available for the LN17
printer. (See Appendix A for ordering information and
Appendix B for installation instructions.)
After installing the OCT, submit your print jobs as usual.
You can set the OCT to operate in three different manners:
• Set the Output Bin option (in both the PCL Emulat and
PostScript menus) to OCT No Offset, and the OCT will not
offset jobs.
• Set the Output Bin option to OCT On Job, and the OCT
will offset jobs from one another.
• Set the Output Bin option to OCT On Job/Copy, and the
OCT will offset jobs from one another. It will also offset
each set of copies of individual pages of an uncollated
multiple copy job.
With the OCT installed, the standard output tray still
functions normally. The OCT gives you approximately
500 sheets of letter/A4 20 lb (75 g/m
2
) maximum collated
output. The standard output tray adds another 250 sheets.
Figure 2.6 Offset Catch Tray (front view)
kug-ch02 Page 26 Thursday, March 6, 1997 4:45 PM