Filter
Top Products
Offset Catch Tray (OCT)
C-36 ❖ LN17 and LN17ps Printers User Guide
Removing the OCT
1
Power OFF the printer and disconnect the power cord and any interface cables.
2
Press the release buttons with your
thumbs and push up on the OCT to
remove it.
To avoid damage to the positioning
hook, do not twist the OCT to the
right or left when pushing up to
remove it.
Store the OCT in its original
packaging materials, or in a dry,
dust-free place.
3
Replace the option interface cover which
was removed and stored when the option
was first installed.
4
Power ON the printer.
After warming up for a few minutes, the
Control Panel displays the following
message:
Online
Ready
If any other message is displayed, see
Table 6.2 starting on page 6-6.
5
Press Online , then Reset and you
see:
Reset Menu
Reset Printer
kug-appc Page 36 Thursday, March 6, 1997 4:51 PM