Filter
Top Products
Automatic Tray Switching
Chapter 2: Paper Handling ❖ 2-17
Example: Main Tray-Front Tray
Table 2.6 below shows how to set the Source Mapping
settings so that the printer pulls paper first from the main tray
and then from the front tray.
Regardless of the source you choose from your application,
the printer will always pull paper first from the main tray.
When the main tray is empty, the printer will pull paper from
the front tray.
† Set this to Front if you want to print special paper through the front tray.
Table 2.6 Source Mapping settings for tray switching
between the main and front trays
PCL Paper Source Source Mapping Setting
Upper Main-Front Tray
Manual Main-Front Tray
†
Manual Envelope Main-Front Tray
Lower Main-Front Tray
Large Capacity Main-Front Tray
Envelope Feeder Main-Front Tray
kug-ch02 Page 17 Thursday, March 6, 1997 4:45 PM