Filter
Top Products
Control Panel Messages
Chapter 6: Troubleshooting ❖ 6-7
*****
The printer is in power on diagnostics.
ACTION: None, if there is no failure during power on diagnostics. After other
diagnostic messages, the final message will be the one that the printer
is online and waiting for data.
Clear Paper Path
A paper jam has occurred. The message alternates with a message that specifies
the location of the jam.
ACTION: See Table 6.4 on page 6-27.
Close Bin
N
The bin numbered N is pulled out.
ACTION: Close the bin.
Close Bins
Two or more bins are pulled out.
ACTION: Close the bins.
Close Covers
Either the front or rear cover (or both) is open.
ACTION: Close the cover, and press Online to resume normal operation.
Comm. Error
The printer is not able to communicate with the host using bidirectional parallel.
ACTION: Check the parallel cable to make sure it is connected properly on both
the printer and the host. Inspect the parallel cable for any defects; if
wires are broken or the cable appears to be damaged, replace the
cable. Check the host to be certain that it is configured properly.
Under the Parallel Menu, turn the Bidirectional option to Off if your
host’s parallel port is not bidirectional. If problem persists, contact your
dealer or Digital.
Comm. Error:
nn
A LocalTalk error has occurred. nn is the AppleTalk error number.
Config. Sheet
Printing...
The Configuration Sheet is printing.
See the Config. sheet option, page D-4.
ACTION: Remove the Configuration Sheet from the output tray when it has
finished printing.
Confirm: OK To
Lose All Data
Second level warning message prior to formatting the hard disk.
ACTION: Press Up to format the disk or press Down to abort.
Demo Page
Printing…
The Demo Page is printing.
ACTION: Remove the Demo Page from the output tray when it finishes printing.
Table 6.2 Control Panel messages (continued)
Message
Description/Corrective Action
Table 6.2 Page 2 of 19
kug-ch06 Page 7 Thursday, March 6, 1997 4:48 PM