Filter
Top Products
Memory SIMMs
C-6 ❖ LN17 and LN17ps Printers User Guide
4
Select an appropriate SIMM slot to use.
Slots SIM2 (A) and SIM3 (B) are
interchangeable and are used for
installing additional printer memory.
5
Insert the new SIMM at an angle into the
appropriate SIMM slot and rotate it up
into position.
6
Make sure that the clips on either side
snap closed to lock the SIMM in place.
7
Replace the controller board, sliding it
along the alignment channels. Then
hand-tighten the thumb screws.
kug-appc Page 6 Thursday, March 6, 1997 4:51 PM