Filter
Top Products
Control Panel Options
Appendix D: Control Panel Options ❖ D-15
Reset All
Reset Menu
Initiates the Reset Printer, Reset Menus, Reset Ethernet, and Reset LocalTalk
functions.
To ensure proper operation of this feature, cycle the printer (turn the
printer off/on) before invoking Reset All.
Reset Ethernet
†
Reset Menu
†
Appears only when the
DNIC-E’NET option is
installed.
Resets the Ethernet network interface card to its power-on state.
Reset LocalTalk
†
Reset Menu
†
Appears only when the
DNIC-L’TALK option is
installed.
Resets the Local Talk network interface card to its power-on state.
Reset Menus
Reset Menu
Resets Control Panel menu options to their factory default settings.
The command does not reset the settings for Language, Defaults, Power Saver,
and Passwords.
The printer remains offline, so you can work with other menus.
Reset Printer
Reset Menu
Resets the printer to its power-on state.
This option is useful when you have printing problems. First, cancel the print job
from the host. Then, invoke Reset Printer.
Reset Printer cancels any print jobs being processed and clears all temporary
fonts and macros.
Reset Printer does not change the menu settings of any network option.
However, any current print jobs being processed by a network option will
be discarded.
Resolution
PCL Emulat Menu
PostScript Menu
600x600*
1200x600
Specifies dots per inch (dpi).
When Print Quality (page D-14) is set to TrueRes or Toner Saving, you
cannot set Resolution to 1200x600.
Table D.1 Control Panel menu options, settings, and descriptions (continued)
Menu Option,
Location(s),
Setting(s)
Description
Table D.1 Page 13 of 16