Filter
Top Products
Control Panel Options
Appendix D: Control Panel Options ❖ D-7
Ethernet Menu
†
Interface Menu
†
Appears only when the
DNIC-E’NET option is
installed.
Invokes the Ethernet Menu.
Font Number
PCL Emulat Menu
0* - 999
Specifies the ID of the default font in PCL.
Only values valid for the Font Source location are displayed. For example, if you
have internal fonts only, the maximum Font Number is 52.
Font Number values are printed on the PCL Font List in the first column. Print a
PCL Font List to find the correct number to use with this setting.
The Font Number setting returns to its factory setting (0) if Symbol Set
(page D-17) is changed. If the Font Source setting specifies a location
other than Internal, Font Number reverts to 0 automatically.
Font Source
PCL Emulat Menu
Internal*
Soft†
Location of the default font in PCL.
Internal refers to the font set residing in the printer’s permanent memory. These
fonts are resident in the printer and cannot be altered.
The Font Source setting returns to its factory setting (Internal) if
Symbol Set (page D-17) is changed. If the Font Source setting specifies a
location other than Internal, Font Number reverts to 0 automatically.
Format the Disk
†
Test Menu
†
Appears only when the
hard drive option is
installed.
Causes the hard disk to be formatted or reformatted.
This action erases all data on the hard disk. It must therefore be
confirmed twice before it is executed.
Form Length
PCL Emulat Menu
005 - 128
64* (Europe)
60* (USA)
Number of lines per page used in PCL.
The Form Length setting is automatically adjusted when Paper Size (page D-12)
is changed. For example, if you set Paper Size to A4 (210x297), Form Length is
adjusted to 64 automatically. If Paper Size is set to Letter (8.5x11), Form Length
is adjusted to 60.
Table D.1 Control Panel menu options, settings, and descriptions (continued)
Menu Option,
Location(s),
Setting(s)
Description
Table D.1 Page 5 of 16