HP (Hewlett-Packard) 5400c Series, 4400c Series Scanner User Manual


 
Back to TOC Scanning from HP Precisionscan Pro 51
Changing highlights
The highlight is the value in the image that is represented on the
screen as white. All values lighter than the highlight also appear as
white.
The image has a default highlight setting. Selecting a higher number
makes more of the lighter values distinct, which increases detail in light
areas. Selecting a lower number makes fewer of the lighter values
distinct, which reduces detail in the light areas.
To adjust highlights for slides, negatives, or other transparent items,
use "Adjusting highlights for slides or negatives" on page 84.
1 On the Advanced menu, click Adjust Exposure.
2 Do one of the following:
l Drag the Highlight slider toward the right.
l Type a higher number in the Highlights field and press ENTER.
l Click the Up arrow next to the Highlight field.
1 On the Advanced menu, click Adjust Exposure.
2 Do one of the following:
l Drag the Highlight slider toward the left.
l Type a lower number in the Highlights field and press ENTER.
l Click the Down arrow next to the Highlight field.
Click (white eyedropper). When the cursor changes to the
eydropper, move it over the area you want to be the highlight and click.
1 On the Advanced menu, click Adjust Exposure.
2 Click Auto to return the midtone, highlight, and shadow to the
default settings for this scanned image. Clicking Auto also returns
output levels to the defaults. See "Setting pixel output levels" on
page 54.
Highlights set at 215
Highlights set at 122