Filter
Top Products
Hitachi Command Control Interface (CCI) User and Reference Guide 155
3.6 CCI Startup
After you have installed the CCI software (see section 3.3), set the configuration definition
file(s) (see section 3.4), and (for OpenVMS only) followed the porting require
ments and
restrictions (see section 3.5), you can begin using the CCI softw
are (HORCM) to perform
Hitachi TrueCopy and/or ShadowImage operations on the attached storage systems.
3.6.1 Startup for UNIX Systems
One Instance. To start up one instance of CCI on a UNIX system:
1. Modify /etc/services to register the port name/number (service) of the configuration
definition file. Make the port name/number the same on all servers.
horcm xxxxx/udp xxxxx = the port name/number of horcm.conf
2. If you want HORCM to start automatically each time the system starts up, add
/etc/horcmstart.sh to the system automatic start-up file (e.g., /sbin/rc).
3. Execute the horcmstart.sh script manually to start the CCI instance:
# horcmstart.sh
4. Set the log directory (HORCC_LOG) in the command execution environment as needed.
5. If you want to perform Hitachi TrueCopy operations, do not set the HORCC_MRCF
environment variable. If you want to perform ShadowImage operations, set the
HORCC_MRCF environment variable for the HORCM execution environment.
For B shell:
# HORCC_MRCF=1
# export HORCC_MRCF
For C shell:
# setenv HORCC_MRCF 1
# pairdisplay -g xxxx xxxx = group name