Filter
Top Products
Hitachi Command Control Interface (CCI) User and Reference Guide 347
Error Code Error Message Condition Recommended Action Value
EX_ENXCTG No CT groups left
for OPEN Vol use.
An available CT group for OPEN
Volume does not exist (TrueCopy
Async or ShadowImage).
Please confirm whether all CT groups are already
used by mainframe volumes (TC and TC390
Async, SI and SI390).
215
EX_ENQCTG Unmatched CTGID
within the group
The CT group references within a
group do not have an identical
CTGID.
Please confirm the CTGID using the pairvolchk
command and/or confirm that group references
within the configuration file (HORCM_CONF)
refer to the same CT group.
214
EX_ENPERM Permission denied
with the LDEV
A device mentioned in the
configuration file does not have a
permission for a pair-operation.
Please confirm if a device which a pair-operation
was permitted by using the pairdisplay or
‘raidscan -find verify’ command.
213
EX_ENQSIZ Unmatched volume
size for pairing
Size of a volume is unsuitable
between the remote and local
volume.
Please confirm volume size or number of LUSE
volume using the ‘raidscan -f’ command, and
make sure the volume sizes are identical.
212
EX_ERPERM Permission denied
with the RAID
A storage system (RAID) mentioned
in the configuration file does not
have a permission for CCI.
Please confirm if the type of storage system is
permitted for a CCI by using the ‘inqraid -CLI’ and
‘raidqry -h’ commands.
211
EX_ESVOLD SVOL denied due to
be disabling
A target volume for SVOL is denied
to become SVOL via LDEV
guarding.
Please confirm whether a target volume is setting
to SVOL disabling by using ‘inqraid -fl’ or
‘raidvchkscan -v gflag’ command.
209
EX_ENOSUP Micro code not
supported
The storage system does not
support a function for CCI.
Please confirm the microcode version by using
the ‘raidqry -l’ command.
210
EX_EPRORT Mode changes
denied due to
retention time
A target volume is denied to be
changing due to retention time via
LDEV guarding.
Please confirm the retention time for a target
volume using ‘raidvchkscan -v gflag’ command.
208
EX_ESPERM Permission denied
with the SLPR
A specified command device does
not have a permission to access
other SLPR.
Please make the SLPR so that the target port and
the command device belongs to the same SLPR.
207
EX_ENOPOL Not enough Pool in
RAID
Could not retain the pool for
executing a command due to be
exceeded the threshold rate.
Please deletes unnecessary/earlier generations
paired volume, or re-synchronizes
unnecessary/earlier generations split volume.
206